All patterns / Tulip in a Vase
Tulip in a Vase — Free Flower Kinusaiga Pattern
Difficulty: Confident beginnerRegions: 8Suggested size: 260 × 260 mmProvisional minimum: 220 mm wide
A single tulip, broad leaves and a simple vase. The crown adds one detail challenge without making the whole pattern intricate.
Download this printable kinusaiga pattern
These numbered PDFs are prepared for a 260 × 260 mm board, the suggested size for this design. Choose the paper in your printer:
Print at 100% / Actual size, then measure the square on each sheet: it should be 25 mm. See the printing guide for joining multiple pages. These files passed digital print checks; physical paper and fabric tests are pending. Use the size tool below if your board has different dimensions.
Size and print for your own board
Advanced settings
Measure the calibration square after printing. If it is not the stated size, turn off scaling in the print dialog (choose 100% or Actual size, disable Fit to page) and print again.
Print preview — 2 sheets of A4 (landscape) · each section 260 × 135 mm · finished size 260 × 260 mm
These sheets make one continuous drawing. Each page is a full-size section. Trim at the corner marks, match the repeated 10 mm strip at the dashed line, and tape the sheets together before transferring the pattern to your board.
At these proportions, one A4 sheet fits about 190 × 190 mm. A larger finished size needs joined pages or larger-format printing. See the assembly guide.
Dashed lines show the paper joins. They are not cuts in the artwork.
Colour reference
A fabric-planning aid — printed sheets always contain the line art with region numbers.
Materials
- Foam board — 260 × 260 mm suggested
- Fabric scraps: pale blue, two coral shades, two greens, warm beige and tan
- Craft knife or groove stylus
- Fabric tucking tool with a rounded tip
- Optional frame or edge covering
Tips for this pattern
- Work on the background and table first.
- Tuck the stem before the leaves.
- Test the flower crown on a scrap piece if the board is small.
Design: KinuMaker · Licence: Free for personal use and for selling finished physical pieces. Please do not redistribute or resell the digital pattern files. · Updated 2026-10-25. Size warnings are provisional geometry guidance. Try a printed sample with your own fabric and tool before cutting the full board.
Making your first piece? Read how to make kinusaiga for materials, cutting grooves and tucking fabric.