Skip to content
KinuMakerKinusaiga patterns

All patterns / Christmas Tree & Baubles

Christmas Tree & Baubles — Free Christmas Tree Kinusaiga Pattern

Difficulty: Confident beginnerRegions: 9Suggested size: 280 × 280 mmProvisional minimum: 220 mm wide

A free Christmas tree kinusaiga pattern with three broad green tiers and three round baubles. Use the numbered template for a flat fabric panel or a handmade holiday gift; this is not a wraparound pattern for a foam-ball ornament.

Created with AI-assisted vector drawing and checked digitally. No physical fabric sample has been made yet.

Download this printable kinusaiga pattern

These numbered PDFs are prepared for a 280 × 280 mm board, the suggested size for this design. Choose the paper in your printer:

Download A4 PDFDownload US Letter PDF

Print at 100% / Actual size, then measure the square on each sheet: it should be 25 mm. See the printing guide for joining multiple pages. These files passed digital print checks; physical paper and fabric tests are pending. Use the size tool below if your board has different dimensions.

Size and print for your own board

1 · Finished size
2 · Paper

Both sizes are always available — the choice is remembered for next time.

Advanced settings

Measure the calibration square after printing. If it is not the stated size, turn off scaling in the print dialog (choose 100% or Actual size, disable Fit to page) and print again.

Preview · finished size 280 × 280 mm

Print preview — 4 sheets of A4 (portrait) · each section 145 × 145 mm · finished size 280 × 280 mm

These sheets make one continuous drawing. Each page is a full-size section. Trim at the corner marks, match the repeated 10 mm strip at the dashed line, and tape the sheets together before transferring the pattern to your board.

At these proportions, one A4 sheet fits about 190 × 190 mm. A larger finished size needs joined pages or larger-format printing. See the assembly guide.

Assembled drawing · 2 × 2 pages
123456789

Dashed lines show the paper joins. They are not cuts in the artwork.

Christmas Tree & Baubles · 280 × 280 mm · A4 portrait
Page 1/4 (row 1/2, col 1/2) · overlap 10 mm · print at 100% / actual size
123456789
25 mm (≈1 in)
Christmas Tree & Baubles · 280 × 280 mm · A4 portrait
Page 2/4 (row 1/2, col 2/2) · overlap 10 mm · print at 100% / actual size
123456789
25 mm (≈1 in)
Christmas Tree & Baubles · 280 × 280 mm · A4 portrait
Page 3/4 (row 2/2, col 1/2) · overlap 10 mm · print at 100% / actual size
123456789
25 mm (≈1 in)
Christmas Tree & Baubles · 280 × 280 mm · A4 portrait
Page 4/4 (row 2/2, col 2/2) · overlap 10 mm · print at 100% / actual size
123456789
25 mm (≈1 in)

Colour reference

A fabric-planning aid — printed sheets always contain the line art with region numbers.

Colour reference for Christmas Tree & Baubles: 9 numbered regions

Materials

  • Foam board — 280 × 280 mm suggested
  • Fabric scraps: cream, three greens, trunk brown, red, gold and terracotta
  • Craft knife or groove stylus
  • Fabric tucking tool with a rounded tip
  • Optional frame or edge covering

Tips for this pattern

  • Start with the background and ground, then the trunk.
  • Work through the three tree tiers before adding the round baubles.
  • Use contrasting bauble fabrics so their outlines remain easy to see.
  • Print a sample of the pointed top and two smaller circles before reducing the size.

Design: KinuMaker · Licence: Free for personal use and for selling finished physical pieces. Please do not redistribute or resell the digital pattern files. · Updated 2026-10-27. Size warnings are provisional geometry guidance. Try a printed sample with your own fabric and tool before cutting the full board.

Making your first piece? Read how to make kinusaiga for materials, cutting grooves and tucking fabric.

More free patterns