Skip to content
KinuMakerKinusaiga patterns

All patterns / Christmas Ornament & Bow

Christmas Ornament & Bow — Free Christmas Ornament Kinusaiga Pattern

Difficulty: Confident beginnerRegions: 9Suggested size: 300 × 300 mmProvisional minimum: 250 mm wide

A hanging Christmas bauble with a green bow and a gold star across its cream band. This free printable kinusaiga Christmas ornament pattern is a flat fabric panel design, not a wraparound template for a foam ball. Nine numbered regions keep the colour plan simple; the small star needs careful tucking.

Created with AI-assisted vector drawing and checked digitally. No physical fabric sample has been made yet.

Download this printable kinusaiga pattern

These numbered PDFs are prepared for a 300 × 300 mm board, the suggested size for this design. Choose the paper in your printer:

Download A4 PDFDownload US Letter PDF

Print at 100% / Actual size, then measure the square on each sheet: it should be 25 mm. See the printing guide for joining multiple pages. These files passed digital print checks; physical paper and fabric tests are pending. Use the size tool below if your board has different dimensions.

Size and print for your own board

1 · Finished size
2 · Paper

Both sizes are always available — the choice is remembered for next time.

Advanced settings

Measure the calibration square after printing. If it is not the stated size, turn off scaling in the print dialog (choose 100% or Actual size, disable Fit to page) and print again.

Preview · finished size 300 × 300 mm

Print preview — 4 sheets of A4 (portrait) · each section 155 × 155 mm · finished size 300 × 300 mm

These sheets make one continuous drawing. Each page is a full-size section. Trim at the corner marks, match the repeated 10 mm strip at the dashed line, and tape the sheets together before transferring the pattern to your board.

At these proportions, one A4 sheet fits about 190 × 190 mm. A larger finished size needs joined pages or larger-format printing. See the assembly guide.

Assembled drawing · 2 × 2 pages
123456789

Dashed lines show the paper joins. They are not cuts in the artwork.

Christmas Ornament & Bow · 300 × 300 mm · A4 portrait
Page 1/4 (row 1/2, col 1/2) · overlap 10 mm · print at 100% / actual size
123456789
25 mm (≈1 in)
Christmas Ornament & Bow · 300 × 300 mm · A4 portrait
Page 2/4 (row 1/2, col 2/2) · overlap 10 mm · print at 100% / actual size
123456789
25 mm (≈1 in)
Christmas Ornament & Bow · 300 × 300 mm · A4 portrait
Page 3/4 (row 2/2, col 1/2) · overlap 10 mm · print at 100% / actual size
123456789
25 mm (≈1 in)
Christmas Ornament & Bow · 300 × 300 mm · A4 portrait
Page 4/4 (row 2/2, col 2/2) · overlap 10 mm · print at 100% / actual size
123456789
25 mm (≈1 in)

Colour reference

A fabric-planning aid — printed sheets always contain the line art with region numbers.

Colour reference for Christmas Ornament & Bow: 9 numbered regions

Materials

  • Foam board — 300 × 300 mm suggested
  • Fabric scraps: warm cream, two reds, two greens, tan and gold
  • Craft knife or groove stylus
  • Fabric tucking tool with a rounded tip
  • Optional frame or edge covering

Tips for this pattern

  • Work the background before the hanger and bow.
  • Tuck the upper, middle and lower ornament bands separately, then add the star.
  • Keep the two bow loops distinct so their seam stays readable.
  • Print a small sample of the hanger and star points before trying a narrower board.

Design: KinuMaker · Licence: Free for personal use and for selling finished physical pieces. Please do not redistribute or resell the digital pattern files. · Updated 2026-10-27. Size warnings are provisional geometry guidance. Try a printed sample with your own fabric and tool before cutting the full board.

Making your first piece? Read how to make kinusaiga for materials, cutting grooves and tucking fabric.

More free patterns